High Strength Gear Kit (276-2250)

The 12-tooth High Strength Gear is molded out of powdered metal. The 36-tooth and 60-tooth Gears have powdered metal inserts. These metallic components will protect the gear from high loads applied by a VEX axle. 

• High strength gears mate with all VEX spur gears.
• Double-thick face width provides added tooth strength.
• Metal Square Hole Inserts prevent axles from "stripping".
• Use metal pinions for high strength where it counts.
• Use the round-hole inserts to build free spinning idler gears.
• Build gearboxes that resist high shock-loads.
• Bolt Gears together for added strength.

(4) 12T High Strength Gear (0.58 inch diameter)

(4) 36T High Strength Gear (1.58 inch diameter)

(4) 60T High Strength Gear (2.58 inch diameter)

(16) High Strength Square Gear Insert

(16) Free Spinning Gear Insert